Measure before you cut
Almost every complaint about aluminium work traces back to a unit built to an assumed dimension. We measure the opening first, every time, and we would rather delay a job than guess at it.
About us
Alumart India Pvt Ltd
We fabricate all types of aluminium windows, wardrobes and profile systems — built on German and Russian technology, and finished to the opening rather than to a catalogue.
Aluminium is an unforgiving material to work badly and an excellent one to work well. It does not warp, it does not swell in the monsoon and it does not need replacing every few years — but only if the section is right for the span, the corners are properly sealed and the hardware is matched to the weight it carries.
Alumart India Pvt Ltd was built around that: fabricate to a real measurement, specify for the exposure the opening actually gets, and stand behind the unit afterwards because our own team installed it.
We work across the full aluminium scope — windows, wardrobes, partitions, ventilators, louvres and the profiles and hardware behind them. That means a single supplier can carry a project from the first site visit to the final adjustment, which is usually the difference between a finish that lines up and one that nearly does.
At a glance
- Company
- Alumart India Pvt Ltd
- Products
- Windows · Wardrobes · Profiles
- Technology
- German & Russian systems
- Scope
- Measure · Fabricate · Install
How we work
Four things we do not compromise on
One team, end to end
The people who measure, the people who fabricate and the people who install all work for us. Nobody gets to point at somebody else when something does not sit right.
Quote line by line
You see what the profile costs, what the glass costs and what the hardware costs. A lump sum hides the places where the specification quietly got cheaper.
Specify for the exposure
A street-facing window and a courtyard window are not the same job. The system, the glass and the finish should reflect that, and we will tell you when they need to.
The process
From first visit to handover
- 01
Measure
We visit the site, measure every opening and record the structural and finish conditions we have to work with.
- 02
Design
You get a drawing and a quote — system, section, glazing, finish and hardware, priced line by line.
- 03
Fabricate
Units are cut, routed, crimped, sealed and glazed in-house, then checked against the approved drawing.
- 04
Install
Our fitting team sets, packs, seals and adjusts each unit on site, and hands over after a working check.
Why Alumart
What you actually get
Made to measure
Every opening is site-measured before fabrication. Nothing is cut to a catalogue dimension and trimmed on site.
In-house fabrication
Cutting, routing, crimping and glazing happen under one roof, so tolerance and finish stay consistent unit to unit.
German & Russian systems
Profile systems and hardware drawn from both engineering traditions — precision detailing with sections built for load.
Full product range
Windows, wardrobes, partitions, ventilators, louvres and the profiles behind them. One supplier for the whole aluminium scope.
Finish options
Powder coating, anodising and wood-finish options across the range, matched across every unit in a project.
Installed by our team
Fitting, sealing and hardware adjustment done by the people who fabricated the unit, not handed to a third party.
Get a price
Tell us about the opening
Send us the dimensions and what you have in mind. We will come back with a drawing, a system recommendation and a price — line by line, no lump sums.